Cursos
Module 4 of 8 · 15 min

The manual pallet truck

Free Warehouse operative and pallet truck course: read the module, review with the questions and move on to the next one. At the end, a test and a PDF certificate.Take the final test and get your certificate →Free PDF certificate when you pass.

Important (in Spanish): Este curso no sustituye la formación específica para conducir transpaletas eléctricas, apiladoras o carretillas (Real Decreto 1215/1997, anexo II, punto 2.1), teórica y práctica, que debe garantizarte tu empresa. See the law: Real Decreto 1215/1997 (BOE)

You are on module 4 of 8 · Course contents

The manual pallet truck (transpaleta manual or transpalé) is a two-pronged fork with a hydraulic system that lifts the pallet slightly so it can be moved along the floor. According to the INSST's NTP 319, its rated capacity usually ranges from 1,000 to 3,000 kg.

Before moving

  • Check that the weight is suitable for the capacity stated by the manufacturer: it must be respected.
  • NTP 319 advises limiting the manual pallet truck to loads of up to about 1,500 kg; above that, an electric one or another mechanical aid is better.
  • The load balanced, wedged or strapped. Never lift with only one fork arm.
  • Check the wheels and the brake. Hands and footwear dry and free of grease.

When moving it

  • NTP 319 describes driving it by pulling the handle, with one hand and standing to one side of the machine.
  • Slopes: the maximum advisable gradient is 5 %. Go down a gentle slope only if it has a brake and with the operator always behind the load.
  • Follow your company's traffic rules and do not leave it where it blocks the way.

The force you apply

The INSST guide (2024) sets reference forces that should not be exceeded when pushing or pulling:

InitialSustained
Women240 N150 N
Men360 N250 N

If getting the pallet moving is very hard, the load, the floor or the ramp is not suitable for a manual pallet truck.

When you finish or if it breaks down

Leave it in the designated parking place with the brake on. If it fails, take it out of use with a sign until it is repaired (NTP 319). The manufacturer's information must be available to you (Real Decreto 1215/1997, article 5.2).

In practiceYou are asked to take a pallet of drinks down the dock ramp with the manual pallet truck, which has no brake. According to NTP 319 this is not done: tell your supervisor so that another means is used.

Source: INSST, NTP 319: Carretillas manuales: transpaletas manuales (manual pallet trucks, in Spanish), recommendations for use · INSST, Guía técnica para la evaluación y prevención de los riesgos de la manipulación manual de cargas (technical guide on manual handling, 2024, in Spanish), pushing and pulling, table 3 · Real Decreto 1215/1997, utilización de los equipos de trabajo (use of work equipment; consolidated text, in Spanish), article 5

Quick review

Check that you've understood. These are questions from the final test: tap an answer to see whether it's right and why.

What rated capacity do manual pallet trucks usually have according to NTP 319?

Up to what weight does NTP 319 advise limiting the use of the manual pallet truck?

According to the INSST guide (2024), what initial pushing or pulling force should not be exceeded for men?

Module practice test

5 new questions, different from the final test. Tap an answer to see whether it is right, why, and which rule it comes from.

1. With how many forks of the manual pallet truck is a load lifted?

2. What condition must your hands and footwear be in when handling the manual pallet truck?

3. Where is the manual pallet truck left when you finish?

4. The manual pallet truck breaks down. What is done?

5. According to the INSST guide (2024), what sustained pushing force should women not exceed?

Take the final test and get your certificate →Free PDF certificate when you pass.

Next module →

Course contents